Menu
The Stremio Blog
  • Stremio News
  • Tutorials
  • Movies
  • TV Series
  • Quizzes
  • Security
  • Download Stremio
The Stremio Blog

Stremio OS is Now Available for Raspberry Pi 5 & 4

Posted on July 19, 2024July 26, 2024 by Alex

We are happy to announce that Stremio is now available for Raspberry Pi 5 and 4, installable on an SD card (of at least 8GB).

Note: While the Raspberry Pi 5 is fully capable of smooth 4K playback, Raspberry Pi 4 will not be able to play 4K content due to hardware limitations.

This release uses LineageOS v21 (based on Android TV 14, custom build by Kostakang), it does not include any Google apps or services, but it does come pre-installed with”Stremio”, “Stremio Launch on Boot” and the “Aptoide TV” app (which will handle auto-updates).

With Stremio OS you have full control over the Android TV OS and liberty of choice of how you want it to behave. For example, you can choose to start Stremio on boot if you so wish, and also have the possibility to disable this feature later on.

In order to install and use Stremio OS on Raspberry Pi, you must follow these steps:

  • download the correct image for your Raspberry Pi (either 5 or 4) from our official downloads page
  • write the image to an SD card (at least 8GB) – if you are using “Etcher“, you will need to use the “Flash from file” button, otherwise if you are using “Raspberry Pi Imager”, then you will need to use the “Use custom” button
  • (optional) expand the main volume – as this is a 7GB image, if written to a larger SD Card there will be unallocated disk space, you can use any partition editor app (such as “GParted“) to extend the /data partition (/dev/block/mmcblk0p4)
  • insert the sd card into the RPI and power on the device
  • complete the one-time setup for Android TV
  • (optional) you can also start the “Stremio Launch on Boot” app, this will make the “Stremio” app automatically start on device boot (to turn the RPI into a single purpose device, yet you can go back from the app to reach the Android TV Home screen at any time)
  • (optional) you can also set the “Stremio” app as a featured app (from the “Apps” panel)

Important: During the bluetooth discovery phase of the one-time setup, you can cancel this step by pressing the “back” button on the TV remote or F2 (if you use a keyboard)

Stremio OS RPI: One-Time Setup
Stremio OS RPI: Set Stremio as Favorite

Our team tested the Stremio OS image on an RPI5 (8GB RAM) and an RPI4 Model B (8GB RAM).

Be mindful that the “Stremio OS” project is still very new and considered experimental for the time being.

Stay tuned, as we have more surprises for our users in 2024!

9 thoughts on “Stremio OS is Now Available for Raspberry Pi 5 & 4”

  1. Taidie says:
    July 22, 2024 at 7:08 am

    Can i set it up on my laptop?

    Reply
    1. Alex says:
      July 23, 2024 at 2:34 pm

      i’m afraid that this release is specific to RPI, but you can use the PC app downloads from the website: https://stremio.com/downloads

      Reply
  2. kevin says:
    July 23, 2024 at 8:14 am

    I tried it on raspberry pi4. It gets stuck on “Searching for accessories” screen during the first boot. Any solutions ?

    Reply
    1. Alex says:
      July 23, 2024 at 3:51 pm

      when this happens, you must press “back” (on the tv remote) or F2 (if you are using a keyboard)

      Reply
  3. Xrhstos says:
    July 23, 2024 at 7:10 pm

    Can I install it on pi3 B+?

    Reply
    1. Mars Northman says:
      July 25, 2024 at 5:05 am

      No, see the nr 3 is NOT the nrs 4 or 5.

      *The more you know*

      Reply
  4. Carlos says:
    July 24, 2024 at 4:49 pm

    Hi, I’ve installed and it was such a painless process! Thanks so much for this release.

    I’ve had to order a new HDMI cable, as the one I’m currently using on my RP5 doesn’t seem to support CEC or HDR. I’ll report back once the new cable has arrived.

    Do you know how to access Stremio OS over SSH? I can see there’s a option to turn on SSH under System->Raspberry Pi settings, but I’ve no idea how to authenticate either with a cert or a username/password.

    Reply
    1. Carlos says:
      July 26, 2024 at 4:24 pm

      New cable arrived. Sadly CEC support and HDR formats are still unavailable. Installed libreELEC and both CEC & HDR worked well. I think this is an issue with Kostakang’s LineageOS v21 build. I also tried V20 with the same result.

      Reply
  5. Bruno says:
    July 24, 2024 at 5:44 pm

    For Android was aways possible. Want to see it for Raspberry Pi OS.

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Search this blog:

Stremio for desktop
Stremio for Android
©2025 The Stremio Blog | WordPress Theme by Superb Themes